Thick plate stamping production line
● Material thickness:0.5-4.5mm
● Stamping production line
● Coil feeding line
● Optional equipment:Thick plate Uncoiler Leveler Combination/ NC Servo feeder
Thick plate Uncoiler Leveler Combination is a non-powered heavy-duty Uncoiler and thick plate leveling machine as one of the models,the use of non-power design,only a short expected material area,effectively shortening the production line accounted for Floor area,saving the plant space; thick plate NC feeder with cylinder binder instead of the traditional screw material,can automatically eliminate the surface of the material with the uneven surface.
Thick plate Uncoiler Leveler Combination with thick plate NC feeding machine stamping production line configuration,thick plate material stamping processing with the most cost-effective type.
Machine equipment components:
1.Thick plate Uncoiler Leveler Combination. Thick plate Uncoiler Leveler Combination is a non-powered heavy-duty Uncoiler and thick plate leveling machine as one of the models,the use of non-power design,only a short expected material area,effectively shortening the production line accounted for To the area,saving the plant space,the rack to install the pressure arm mechanism,with the oil on the expansion device,can adapt to the needs of customers diversified production.
Thick plate Uncoiler Leveler Combination leveling pressure through the sliding gear worm gear lifting device on the cylinder control to achieve the role of the leveling mechanism in the sheet on the leveling force adjustment,while ensuring the quality of leveling while avoiding the pressure Excessive damage to the material and leveling roller,leveling adjustment from the traditional hand wheel adjustment to worm gear adjustment,can be fine for adjustment to ensure efficient precision leveling. At the same time thick plate leveling machine into and out of the mouth of the installation of a group of feed roller to ensure that they are pressed with the bottom of the roller sheet,to achieve the thickness of the sheet metal transmission and leveling. Up and down the wheel to strengthen the installation of the device to ensure that the reliability of sheet metal leveling,the current stamping industry is the most advanced plate leveling equipment.
2.Thick plate NC screw feeder. The cylinder press material instead of the traditional screw press material,this section of the plate NC feed machine according to the thickness of the raw material plate by the cylinder automatically control the upper and lower conveyor roller gap,a great manpower savings,and because the control device of the two cylinders The same gas source,so the pressure consistency at both ends of the high,while the NC feed machine press the cylinder can automatically eliminate the surface of the material with the surface of the uneven surface or the two sides of the raw material with the edge of the thickness of the inconsistencies caused by the gap between the upper and lower conveyor Small changes,which can effectively avoid the feeding bias,wrong delivery,the occurrence of chaos phenomenon,fundamentally ensure the stamping production efficiency.