Does the Straighteners have a strict thickness range requirement?
Jinzhide’s Straighteners belongs to the roller leveling equipment, which uses the misalignment of the leveling roller repeated pressure, through the elastic-plastic staggered bending and the amount of deformation, so that the plate becomes flat, more important Is to eliminate the stress, this leveling process has simple operation, anyone can simply grasp the advantages. And this process to achieve leveling effect has three core factors: leveling roller diameter, roll spacing and quantity.
Which also requires different thickness requirements of the Straighteners roll diameter, spacing and quantity is different, there is a set of international standards:
1.The thickness of the material for the application of 0.05-0.3mm, roller diameter φ12mm, usually 19 (9 on the next 10).
2.The thickness of the applicable material 0.1-0.6mm, roller diameter of φ20mm, usually need 19 (9 on the next 10).
3.The thickness of the material for 0.3-1.5mm, roller diameter φ32mm, usually need 19 (9 on the next 10).
4.The thickness of the material for 0.5-3.0mm, roller diameter of φ52.5mm [or φ60mm], usually need 7 (3/4).
5.The thickness of the material for 0.6-4.5mm, roller diameter of φ70mm, usually need 9 (4/5).
6.The material thickness of 1.0-6.0mm, roller diameter of φ80mm [or φ85mm], usually need 9 (on 4/5).
Simply point, each thickness of the Straighteners roller diameter, spacing and quantity have strict requirements, and this is Jinzhide Straighteners model classification standards.
For example, the actual material is 0.1-3.0mm customers, and the actual level of 0.1mm leveling roller can only be the largest φ20mm; and the actual level of 3.0mm leveling roller to the smallest can only be Φ52.5mm. At the same time the two materials required to roll the number of rollers, roller spacing requirements are different, which determines that we can not be achieved through a machine.
Post time: 08-04-2017