SEYI punch NC servo feeder installation

SEYI punch NC servo feeder installation

SEYI punch press and CHIN FONG punch Taiwan is the largest two precision punching machine manufacturers, but also the most widely used punch one of the brands. SEYI Punch high precision, easy to operate, the basic will be equipped with automated equipment for continuous punching production, SEYI punch commonly used feeder equipment is high-speed roller feeder and NC servo feeder, Jinzhide NC servo feeder for easy step adjustment, feeding Higher precision, feeding time and relaxation time setting has become the first choice with SEYI punch.
Jinzhide SEYI punch NC servo feeder installation method to be briefed.
First, the NC servo feeder crane lifted with a fixed plate with hexagonal M16 screws and M16 flat washers and fixed plate locking.

Second, when the level of the feed height and die line height inconsistencies, Jinzhide NC servo feeder mounting plate will be adjusted up and down the amount of adjustment can be adjusted at this time can be installed on the board two hexagonal screw loose, Adjust the feed height adjustment screw fixed to the lower end of the mounting plate to change the horizontal position of the feeder (when the servo is rotated clockwise, the NC servo feeder is raised, and when the counterclockwise rotation is made, the NC servo feeder is lowered) to After the proper place, tighten the screws.

Third, placed in a good position electric control box, and the NC servo feeder body connected to the servo motor plug, pulse lines and signal lines; and SEYI punch connected to relax, feed the signal line; Finally, connect the external power supply Line (R, S, T three-phase, E is the ground line).
1.Servo motor connector and NC servo feeder plug body, pulse line and signal line.

2.And SEYI punch connected N24, P24 and X0 to relax, X1 feed signal line 【Jinzhide NC servo feeder test machine connected to X1 and P24 then press 6a, 6C cam signal to control the feeding action; X0 and N24 then press 7a, 7C cam signal, control the relaxation action].

3.Connect the power cord with the external power (R, S, T three-phase, E for the ground), NC servo feeder machine to ensure effective grounding.

4.After checking the correct machine can be used.