Stamping die protection device
In the stamping production,the mold is very important,especially the continuous metal stamping die,its high precision,in the stamping production must strengthen the protection of the mold.Jinzhide Stamping Die Protection System and Press Malfunction Detector is to protect the stamping die of the special equipment.
1.Stamping Die Protection System.Usually die damage is due to feed is not accurate, the feeder material during the feeding process caused by material fluctuations squeeze material arch,stamping when the waste can not be discharged in time mold.
Stamping Die Protection System can be very good Detection of the above situation,in the event of the situation can control the punching machine immediately stop.
2.Stamping Malfunction Detector.Stamping die due to the stamping of a good product can not be removed from the mold,resulting by stamping die damage.Stamping Malfunction Detector can be very good through the infrared sensor to monitor the stamping product out of the situation.
When the stamping product is not removed from the mold, the stamping fault detector can control the punching machine to stop immediately.
3.Double Side Lubricator.Double-sided oil supply to the material evenly coated on both sides of the stamping oil,can make the material in the stamping is not easy to scratch,but also better lubrication stamping die.
Post time: 07-03-2017