Coil Processing Equipment
● Material thickness:0.3-4.5mm
● Suitable for all kinds of metal sheet straightening and feeding.
● Japan Mitsubishi PLC
● Japan Mitsubishi Servo motor
● Automatic feeding coil
● High speed :22m/min
● FOB port:SHANGHAI OR OTHER PORT
Coil Processing Equipment Specification :
|Material strength||b≤392Mpa σs≤245MPa|
|Applicable material thickness||0.5-4.5mm|
|Inside coil diameter||Φ508mm|
|Max.coil outside diameter||Φ1200mm|
|Max. feeding speed||22m/min|
|Expansion style||Hydraulic expnsion|
|Pressing way||With pressing arm|
|Straightener roller||7 Pieces , top4/bottom 3,Φ68mm|
|Power||AC380V±10%，50HZ ±2% , (can be changed according to your requirement)|
|Running direction||From left to right|
|The Equipment size|
|The Equipment weight|
|After-Sale service||1 Year|
|Delivery time||30-45 workdays|
|Shipping way||Ocean shipping|
|Payment term||T/T L/C Cash or other|
Coil Processing Equipment Straightening Capacity:
The above figures are the material having yield strength of σs=245N/mm² max ( Tensile strength of σb=392N/mm²)
Coil Processing Equipment Features:
● Apply to thin and thick material, ex: Aluminum, copper and stainless steel. Apply material thickness 0.5mm to 4.5mm.
● Material clamping device, could facility on coil entering for operator and time saving as well.
● Use Japanese servo motor, and feeder gear take heat treatment and precision ground to ensure high feeding precision.
● Leveller and feeder rollers use bearing steel (SUJ2), take heat treatment to strength hardness to HRC60o and precision ground on shaft to ensure the high precision.
● The surrounding work area has been increased by reducing the system’s dimension as much as possible.
● As standard equipment, it comes with 2 sets of entry coil width vertical guide rollers.
● Feed roll pressure is easily adjusted by using an air cylinder.
● We can customize the machine.