Die Protection System
Features:
● Simple operation interface
● Good anti-vibration&immunity
● High accuracy:upto 1um
● Wide set range:+-1um~99um
● Last time Value Comparison
● Periodic Monitoring
● FOB port:SHANGHAI OR OTHER PORT
Product Detail
Application Video
Product Tags
SD-401-One basic unit, Single output device (Single Port) SD-402-One basic unit, Dual output device (Dual Ports)
Die Protection System Specification:
| OperatingTemperatureRange | 0~50℃ | Standard Accessories | Sensor、Sensor line 3M、iron block |
| Weight | SD-401-2.2kg / SD-402- 2.3kg | Length of Sensor | 10 cm |
| Output Contact | Relay Contacts（A..B）250V3A | Length of Join Cable | 3M and 5M 2Models |
| Power Supply | AC85V~250V50/60Hz ±10% | Gap between and Proximity Element | 0.8mm~1.2mm |
| Dimensions | 105W*140H*185D | Maximum Speed | 1200 S.P.M |
Die Protection System FEATURES:
●Sensor operation setup distance: Location(A)from 0.8mm to 1.2mm,please press setup switch thereafter 199-0 displayed ,Move the iron block of the sensor head ,it can be adjusted to 80~120 as operation distance. (Meaning 0.8mm to 1.2mm ) Press setup switch again after set-up process.
●Operation of monitoring value setup: Accuracy range set up from ±1μm~±99μm,depends on your exact accuracy requirement.
●While stamping die starts running, the first four times displaying digits meaning the average of the die-height testing.(It will be re-calculated while stamping machine power off or the sensor line out of the basic unit and re-plug-in).
●Self-Check functions available.
●This product provides precision set-up value as 1μm, it is selectable against different accurate toolings.
●Options available for Error-Carry-On, Missing material (by Electro-Eyes sensor) and Material Jammed (By sensoring Bar)
