Double Straightener Machine
Features:
● Material thickness:0.1-0.6mm
● High accuracy
● simple operate
● easy for metal Leveling
● high material feed precision
● suitable for many kinds of punching machine
● FOB port:SHANGHAI Port or China other Port
Product Detail
Application Video
Product Tags
Double Straightener Machine Specification:
| Model | GJ-150A GJ-150B |
GJ-200A
GJ-200B |
GJ-300A
GJ-300B |
GJ-400A
GJ-400B |
| Material width(mm) | 150 | 200 | 300 | 400 |
| Material thickness(mm) | 0.1-0.6 | |||
| Material out speed(m/min) | 0-16 | |||
| Straightener roller(mm) | A series:Φ20*25pcs[3 On Top/4 On Bottom+9 On Top/10 On Bottom]
B series:Φ20*19pcs[9 On Top/10 On Bottom] |
|||
| Material out direction | Left ← → right | |||
| Straightening Method | A series:8point fine micro adjustment/B series:4point fine micro adjustment | |||
| Motor(HP) | 1/2 | 1 | 1 | 2 |
| Package | Wooden Case | |||
| After-sale service | 1 year | |||
| Delivery time | 1-20workdays | |||
Double Straightener Machine Features:
● This is a special designed straightener for plane materials that need high precision punching treatment.
● Adopts rough straightening for the wide rows, precise straightening for narrow rows and diverse laying principle. The rough straightening brings the material the same bend arcs, then use the precise straightening to meet the customer punching requirement.
● The flattening and the straightening secondary wheels adopt the imported SUJ2, milling after HRC60°heat treatment and starts production after plating the hard chrome to ensure evenness of the chrome layers and the form tolerances of each bearing.
● The flattening adjusting adopts the floating four-point balancing equipment, with the dial indicator, which can find the leveling point rapidly.
● Adopts the synchronous transmission structure to transfer each leveling roller individually to lower the panel surface flatness improving requirement because of the inter spaces caused by wheels rotating.
● Adopts the cardigan joint and the gear transmission, suitable for straightening high precision requirement products.
● Due to the differences of the material quality, width and thickness, there are no fixed values as the preferences; therefore, taking some materials for pilot run before the mass production and start the continuous assembly after it reaches the standard.
