Press Malfunction Detector
● Protect safety and plant equipment
● End-of-Material Detection
● Buckling Detection
● Mis-feed Detection
● Ejection detection
● Hot sell in the market
● Superior quality and durable
● FOB port:SHANGHAI OR OTHER PORT
Press Malfunction Detector Specification:
|Channel||4.check individually||4.check individually|
|Swiches||A/B memory/synchronize||A/B memory/synchronize|
|Responsetime||“on” check 3u,”off”check:<300u||“on”check3u,”off”check:<300u|
|Power||AC 85V-270V 50/60Hz +10%||AC 85V-270V 50/60Hz 10%|
|Output signal||Relay/A/B 220V3A||Relay/A/B 220V3A|
|Input signal||DC 12V detecting device||DC 12V detecting device|
Press Malfunction Detector FEATURES:
●Press Malfunction Detector is designed to detect the working environment of the press dies. Its function include material mistrans mission, product pass-through, position confirmation, squeeze type molded packing, end edge of material and Air-gap rising. Hence it can be applied to protect dies and mechanism, and eliminate defects during producing.
●Non-Contact Checking Methode:
Limit Switch Used to do discharge and synchronization check.
The chart showes the relation between the output signal time and the angle.
●SD-101 inspects the processing by utilization of sensor input connected to SD-101 and the detection-timing signal which synchronizes with the operation of the press machine. When the malfunction is detected, a stop signal is output to the press machine.